Italian Wine Classification Laws

First thing; Italian wine laws are complicated. Second thing; you’ll think they’re less complicated after reading this. Italian wine laws got their start in the 1960’s when it was recognized that Italian wines would need some indicator of quality on the world market. There was quite a bit of plonk travelling the globe back then, causing some consumers to get stuck with bad wine. Since we tend to lump everything together (one bad Italian wine = all Italian wine is bad), Italian exporters were worried that the one bad bottle could turn off a consumer for life. (There might have also been some jealousy that the French already had the AOC). So, they devised a classification system to indicate wines of origin.

The classification system that they originally devised had three levels. The first level is DOCG (denominazione di origine controllata e garantita), which means denomination of controlled and guaranteed origin. Essentially, this meant that the wine was made in a specific area under specific conditions and was guaranteed to be good. Now, obviously, this was a strong statement to guarantee that the wine would be good, and we’ll see why the Italians were comfortable with that name. The second level is DOC (denominazione di origine controllata), which means denomination of controlled origin. This next level loses the guarantee. As expected, more wines can fall into this category. Only about 12-15% of wines made in Italy achieve either of these two designations. The third, and lowest level, was vino da tavola, or table wine. This was essentially everything else, which included cheap, bargain wine.

In 1992, a new layer was added, IGT (indicazione geografica tipica), or indication of geographic type. This law was passed to bring supertuscans into the fold. These wines were originally classified as vino da tavola, lumping them with some pretty poor wines. The supertuscan producers weren’t too happy about this, so they lobbied for and got the additional level.

Now that you know the different levels (if you need a mnemonic, GDIV might work), what does it all mean?  The first thing is that it utilizes the French concept of terroir. DOCG, DOC, and IGT are defined by geographical boundaries. That means that there is a delineated area in which wines can be made that can be labeled with the classification. So, when you read the names of the classifications, it might be like vernaccia di San Gimagnano, which means vernaccia (a grape) of San Gimagnano (a city in Tuscany). This means that this wine was made from Vernaccia grapes near San Gimagnano. Due to this geographical construct, you are going to learn a lot about Italian cities, regions, and areas. (Trust me, a lot better than putting that 50 state puzzle together). The best way to approach the study of the areas is by region. Since Italy only has 20 regions, it is a little easier than the US.

Of course, you can also go the easy way and not care about any of the regions and just look at the label. This was the original intent of the law. When you look at the label, it will clearly say the words DOCG, DOC, IGT, or vino da tavola. Now, these are broad measures of quality, so an IGT might be better than a DOC, but not on average. If you are even less motivated, there will always be a red and white banded seal over the foil on the neck of the bottle. This is the anti-tampering device used for DOC wines. If you see that, it’s DOC. You will still have to read it, but it makes identification a little easier.

So maybe you have decided to learn a little about the different regions (not a complete slacker).   There are really only three main ones (IMO). I’m going to start with one of the easiest, Abruzzo. Abruzzo is a region on the Adriatic sea in the center of Italy. It has a total of four DOC’s and one DOCG. Let’s ignore two of the DOC’s since you will probably never find them in the US. The two main DOC’s are trebbiano d’Abruzzo and montepulciano d’Abruzzo. This indicates the grape (trebbiano and montepulciano) and the region it was grown in (Abruzzo). Now, there is only a specific section of Abruzzo that these can be grown and labeled as DOC. However, there is a specific section that has such quality it is guaranteed. This is montepulciano d’Abruzzo Colline Teramane. This is a more restricitive location centered around Colline Teramane that warrants a DOCG. You can go to any store and find montepulciano d’Abruzzo. So, walk down to a decent wine shop and scan the Italian section for this wine, look on the label and you’ll see the DOC (or DOCG if you can find the more restrictive one). Congratulations, you’ve just figured out Abruzzo, only 19 to go.

The next one is the most famous, and it is Tuscany. Tuscany is a lot more complicated than Abruzzo, however, the wines are easily found in pretty much any store. The most ubiquitous is Chianti. Now, Chianti is DOCG if it comes from specific areas. You’ll have to read up on those as there are quite a few since it is a large area. One group has found an ingenious workaround, show a black rooster. The black rooster is the symbol of a consortium in Chianti, so when you see it you’ll know it is Chianti Classico, a DOCG wine. You’ll notice Chianti doesn’t have a “di” in it. Well, you just have to know that it is the sangiovese grape. So, when you say Chianti, think sangiovese di Chianti. Finally, there is Piedmont. Piedmont, nestled up in northern Italy is home to about the same dizzying number of DOC and DOCG wines. Let’s focus on dolcetto since it has three DOCG and seven DOC wines and illustrates the whole point about the classifications. The idea is that we can stop right here and don’t have to learn anything. If we see a DOCG on the label, it’s from one of the three areas. If it’s only a DOC, then it must be one of the other seven. If it has IGT, then it must have been grown outside of the areas defined here. Or, we can go further and actually learn the names of the different regions and search out the ones we like. Completely up to you, learn as much or as little as you would like.  Then, just when you thought you have it figured out, the EU steps in and changes it to DOP, but that’s another story.

Maple syrup

 I have been having some thoughts about making maple syrup.  The idea has always somewhat intrigued me.  I haven’t been too interested until I started reading this book on Food Systems.  The idea is to produce as much as possible by yourself or people close to you, so you know exactly what you are eating.  Anyway, I wanted to share a few things I have learned in ym readings so far.

                The first is not something I learned about maple syrup in particular, but about all things, start off slow.  I could go out and buy a nice evaporator for $1000, but what if I find it too difficult to do?  What if it is too difficult?  If any of these happen, I would have to sell the evaporator at a loss.  Instead, it pays to start small.  So, I’ve decided to just do a trial run next spring to see where we stand.  The most important part will be finding out how much sap we can harvest.  My brother has a whole stand of sugar maples, but I don’t know how much they will produce.  Since the evaporator size would be based on the amount of sap, it would be good to know how much I am dealing with.
                The second thing is about the evaporator.  I lerned that there are two basic parts, the arch and the pan.  The arch is where the fuel is burned and the pan is where the sap is boiled.  The arch can be wood, oil, or gas fired.  I don’t really want to pay for fuel, so we’ll be going with a wood fired arch.  The arch size is determined by the pan size.  The pan is the area where the sap is boiled and can constitute just a flat pan, or more elaborate flue pans.  A pan can evaporate about 1 gallon per sq ft per hour.  Since 30-40 gallons of sap is required for 1 gallon of maple syrup, you don’t want to be there all day.  So, most people go for anywhere between 4-8 square feet.  This means that it would take 10 hours of burning to get 1 gallon on a 4 sq ft pan or 5 hours on an 8 sq ft pan.  I’m thinking 8 sq ft will be what is needed, but we’ll verify when the sap starts running.  This necessitates an evaporator that can hold an 8 ft pan.
                So, what am I going to do?  I think I am going to build a poor man’s evaporator at first.  This is a concrete block and firebrick evaporator that can be placed on the ground.  I am not going to mortar it so I can take it apart and sell the components if I want to.  This way, I can make it any size I need in order to manage the amount of sap I have.  I have some double walled stove pipe I can use for the chimney and some steel plate for the “door.”  This way, I can get a good fire going and make most of the heat boil the sap.  Also, if I don’t like it, then I can just dismantle the items and be done with it.  I am also taking the same approach with the pans.  I will be using some stainless steel buffet pans.  These are cheap and work well.  Also, if things don’t work out, I can sell the pans and only be out a little bit of money.  The only thing left to do now is to wait for spring!